Y Type Strainer

Strainers are always recommended to be installed prior to the Reducing valve, to prevent any of the dirt particles/pipe muck from clogging the small orifices/openings of the Reducing Valve.

Volfram Y - Type Strainers with Stainless Steel Screens having mm dia. perforations as standard.

We also offer a wide range of Strainers for various applications like Steam, water s condensate. The types of Strainers available are:


  • Bucket Strainers
  • In line Conical Strainers


Other Applications: At the inlet of Steam flow meters, Control valves etc.
Available Sizes: From 15NB to 200NB.

Comments

Post a Comment

Popular posts from this blog

Shell & Tube Heat Exchanger

Image
Introduction: A shell and tube heat exchanger is a class of heat exchanger designs. It is the most common type of heat exchanger in oil refineries and other large chemical processes and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle and may be composed of several types of tubes: plain, longitudinally finned, etc. Volfram offers Shell and Tube Heat Exchangers with Smooth Tubes and Corrugated Tube through its fixed sized ranges and customized ranges of heat exchangers for applications such as preheaters, hot water generators, and condensers, reboilers. The heat exchangers are designed on the basis of our extensive thermal and mechanical experience acquired over the period of time throu...
Read more

Control Valve

Image
VOLFRAM offers Globe Control Valve for Steam and Compressed Air. Nominal valve sizes ½” to 10” (15 to 250 mm) Pressure rating ANSI Class 125 to 300 Temperatures − 320 °F to +800 °F (− 196 °C to +427 °C) The control valves consist of a body with trim, bonnet and pneumatic actuator, optionally with metal bellows or insulating extension. The valves may be also equipped with electric, electro-hydraulic, or hand-operated actuators, as well as control accessories and other instrumentation. Standard Versions:  Body ASTM Cast A 126 Cl. B, A 216 WCB, A 351 CF8M, alter-natively Forged A105 or A 182 F316 End connections ANSI Class 125 with FF-Flanges, Class 250 Female threaded NPT, Class 150 or 300 with RF-Flanges Packing PTFE V-ring spring-loaded/self-adjusting, temperature range 15 °F to 430 °F (− 10 °C to + 220 °C) Trim equal percentage characteristic, metal-to-metal seal
Read more